Dimm Configurations; L2 Cache; Graphics - Sony PCV-LX700 - Vaio Slimtop Computer Reference Manual

88
VAIO Slimtop™ Reference Manual

DIMM Configurations

*
DIMM1
0, 16, 32, 64, 128, 256
* The PCV-LX700 is shipped with 64 MB. The PCV-LX800 is shipped with 128 MB. SDRAM is expandable to
512 MB. Computer SDRAM is unbuffered DIMM, specification Rev. 1.0 or later. Supports SDRAM memory.
Does not support EDO memory or buffered DIMM memory. Memory can be installed in either socket.
Memory size can vary between sockets. DIMMs can be single- or double-sided. DIMMs must be 3.3V
unbuffered 4-clock, 64-bit or 72-bit, 133 MHz SDRAM module. Use only 133 MHz memory. Do not mix 100
MHz memory with 133 MHz memory.

L2 Cache

Installed
Controller

Graphics

*
Controller
Video memory
Resolution (displayed resolution depends on the graphics display you use)
True color (32 bits) Up to 1600 x 1280 at 85 Hz non-interlaced
High color (16 bits) Up to 2048 x 1536 at 70 Hz non-interlaced
256 colors (8 bits)
* Supports DDC-1 and DDC-2b standards for Plug and Play displays.
DIMM2
0, 16, 32, 64, 128, 256
256 kbytes secondary write-back cache (in processor),
direct-mapped organization, on-chip cache
SiS630 host bridge controller
SiS630 graphics hardware acceleration
PCV-LX700: 8 Mbytes (uses system memory)
PCV-LX800: 16 Mbytes (uses system memory)
Up to 2048 x 1536 at 70 Hz non-interlaced
*