Setting the Configuration Switches
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove any add-in cards (see
page 25).
2
Set the switches as needed (see
page 18).
3
Replace any add-in cards removed in step 1 (see
In Card"
on page 24).
Removing, Installing, and Replacing Components
"Removing an Add-in Card"
"Configuring the System Board"
on
on
MAN008.VSD
"Installing an Add-
27