Table of Contents
Advertisement
3
Click the Supervisor Password icon.
The Supervisor Password tab of the TOSHIBA Password
Utility window appears.
4
Click Not Registered.
A pop-up screen appears asking for a password.
5
Enter the password, then click OK.
6
Click OK to exit.
7
Restart the system to complete the process.
Using a user password
A user password provides power-on password protection.
Setting a user password
To register a password for the power-on password functions:
1
Click the Start button and, in the Search field, type TOSHIBA
Assist. In the list that appears above, click on your selection.
The TOSHIBA Assist window appears.
2
On the left side, click the Secure tab.
3
Click the User Password icon.
4
Click Registered.
5
Enter your password, and then enter it again to verify.
6
Click OK.
7
Click OK to exit.
Deleting a user password
To cancel the power-on password function:
1
Click the Start button and, in the Search field, type TOSHIBA
Assist. In the list that appears above, click on your selection.
The TOSHIBA Assist window appears.
If you choose to set a supervisor or user password, TOSHIBA
strongly recommends that you save your password in a location
where you can later access it should you not remember it.
TOSHIBA is not responsible for any losses that may occur to you, your
organization or others as a result of the inability to access your
computer.
Utilities
Setting passwords
97
Hide quick links:
Advertisement
Table of Contents
