Completing The Setup - IBM 8837 - eServer xSeries 336 User Manual

10. Extract the files into d:\ibmssp. See the readme.txt file, which is included with
11. Follow the instructions in Remote Supervisor Adapter II Installation Instructions,
12. Restart the server after installing the device drivers.

Completing the setup

See the IBM Remote Supervisor Adapter II User's Guide for instructions for
completing the configuration, including the following procedures:
v Configuring the Ethernet ports
v Defining login IDs and passwords
v Selecting the events that will receive alert notifications
v Monitoring remote server status using the Remote Supervisor Adapter II SlimLine
v Controlling the server remotely
v Attaching a remote diskette drive, CD-ROM drive, or disk image to the server
After you configure the adapter, use the Web-based interface to create a backup
copy of the configuration so that you can restore the configuration, if you need to
replace the adapter. For more information, see the Remote Supervisor Adapter II
User's Guide.
4. In the Restrict to this brand field, select Servers.
5. Wait for the page to automatically refresh; then, in the Restrict to this family
field, select xSeries 336 (the server in which the Remote Supervisor Adapter II
SlimLine is installed).
6. Wait for the page to automatically refresh; then, in the Enter search terms
field, type system service package. (Do not use the Search field at the top of
the page.)
7. Click Search.
8. Select the system service package for the operating system that is running on
the server in which the Remote Supervisor Adapter II SlimLine is installed.
9. Click the file link to download the system service package to d:\ibmssp, where
d is the hard disk drive letter. (Create the directory if necessary.)
the extracted files, for a list of the files in the package.
which is in Portable Document Format (PDF) in d:\ibmssp, to install the
software and firmware.
Web-based interface
Chapter 2. Configuring the server
41