Formatting A Scsi Hard Disk Drive; Using The Serverguide Setup And Installation Cd; Serverguide Features - IBM 8670 - Eserver xSeries 345 User Manual

4. Follow the instructions on the screen to change the settings of the selected

Formatting a SCSI hard disk drive

Low-level formatting removes all data from the hard disk. If there is data you want
to save, back up the hard disk before performing this procedure. Complete the
following steps to format a drive.
Note: Before you format a SCSI hard disk, make sure that it is not part of a
1. From the list of adapters, select the controller (channel) for the drive to format.
2. Select Device Properties.
3. Use the arrow keys to highlight the drive to format.
4. Use the arrow keys or the End key to scroll to the right.
5. Select Format; then, press Enter to begin the low-level formatting operation.

Using the ServerGuide Setup and Installation CD

The ServerGuide Setup and Installation CD includes an easy-to-use setup and
installation program that is designed for your IBM server. The ServerGuide program
detects the server model and hardware options that are installed and uses that
information during setup to configure the hardware. The ServerGuide program
simplifies operating-system installations by providing updated device drivers and, in
some cases, installing them automatically.
If a later version of the ServerGuide program is available, you can download a free
image of the ServerGuide Setup and Installation CD, or you can purchase the CD.
To download the image, go to the IBM ServerGuide Web page at
http://www.ibm.com/pc/qtechinfo/MIGR-4ZKPPT.html. To purchase the latest
ServerGuide Setup and Installation CD, go to the ServerGuide fulfillment Web site
at http://www.ibm.com/pc/coupon/.
The ServerGuide program has the following features to make setup easier:
v An easy-to-use interface with online help
v Diskette-free setup, and configuration programs that are based on detected
v ServeRAID Manager program, which configures your ServeRAID adapter or
v A system BIOS code update program, which updates the BIOS code directly from
v Device drivers that are provided for your server model and detected hardware
v Operating-system partition size and file-system type that are selectable during

ServerGuide features

Features and functions can vary slightly with different versions of the ServerGuide
program. To learn more about the version that you have, start the ServerGuide
Setup and Installation CD and view the online overview. Not all features are
supported on all server models.
items; then, press Enter. The Device Properties and Mirroring Properties
choices produce additional screens of parameters to review or change.
mirrored pair. From the list of adapters, select the controller (channel) for the
drive to format. Select Mirroring Properties and make sure the mirroring
value for the drive is set to None.
hardware
integrated SCSI controller with RAID capabilities
the CD
setup
Chapter 2. Configuring your server
15