IBM 8648 - eServer xSeries 226 User Manual page 28

|
|
|
|
|
|
|
|
|
|
|
|
16
xSeries 226 Type 8648: User's Guide
v Advanced Setup
Select this choice to change settings for advanced hardware features.
Important: The server might malfunction if these options are incorrectly
configured. Follow the instructions on the screen carefully.
This choice is on the full Configuration/Setup Utility menu only.
The following choices are available:
– Memory Cache
Select this choice to specify what types of memory to cache and how the
cache should function (Write Protect, Write Back, Write Through, or Disabled).
– CPU Options
Select this choice to enable or disable Hyper-Threading Technology. The
default setting for Hyper-Threading Technology is Enabled.
Attention: Do not make changes in the Advanced Processor Control
option unless directed to do so by an IBM authorized service representative.
– Advanced Chipset control
Select this choice to modify settings that control features of the core chip set
on the system board, such as the PCI master latency timer or the PCI
interrupts.
Attention: Do not make changes in the Advanced Chipset Feature option
unless directed to do so by an IBM authorized service representative.
– PCI Bus Control
Select this choice to set the PCI master latency timer value and PCI interrupt
routing.
– Power Management Setup
Select this choice to enable or disable system power settings. This includes
automatic power-on settings such as the Wake on LAN feature.
– Hardware Monitor
Select this choice to display the server temperature and voltage status, and
fan speeds.
– ASF Configuration
Select this choice to set the event-specific intervals of time at which the
system automatically resets if events such as operating-system startup or
BIOS startup do not complete.
v Error Logs
Select this choice to view the three most recent error codes and messages that
the system generated during POST, to view the Desktop Management Interface
(DMI) event log, and to clear the error logs.
v Save Settings
Select this choice to save the changes you have made in the settings.
v Restore Settings
Select this choice to cancel the changes you have made in the settings and
restore the previous settings.
v Load Default Settings
Select this choice to cancel the changes you have made in the settings and
restore the factory settings.