Table of Contents
Advertisement
Microprocessor
Microprocessor
connector
11. Close the microprocessor-release lever to secure the microprocessor.
12. Remove the heat sink from its package and open the heat-sink retention clip:
a. Release the heat-sink retention clip from the locked position.
b. Rotate the heat-sink clip to its fully open position.
13. Remove the cover from the bottom of the heat sink.
14. Position the heat sink above the microprocessor and align the heat sink with
the alignment posts; then, press on the top of the heat sink, rotate the
heat-sink release lever, and move the lever to the locked position.
Microprocessor
orientation indicator
Microprocessor-
release lever
Heat-sink retention clip
Alignment posts
Chapter 2. Installing optional devices
49
Advertisement
Table of Contents
