Dodge 2009 Journey Owner's Manual page 402

400 WHAT TO DO IN EMERGENCIES
Lowering/Raising Spare Tire
NOTE: Assemble components 2 and 3 by seating the
small ball at the end of component 2 in the small hole at
the end of component 3. This will lock these components
together. Assemble components 1 and 2 so that the wheel
nut socket at the end of component 1 faces upward when
seated on component 2. This will make it easier to rotate
the assembly when operating the winch mechanism.
2. Fit the assembled jack-handle over the winch drive
nut located in the jack storage area. Rotate the jack-
handle assembly counterclockwise until there is enough
cable slack to allow you to pull the cable and retainer out
from underneath the vehicle.
CAUTION!
The winch mechanism is designed for use with the
jack-handle only. Use of an air wrench or other power
tools is not recommended and it can damage the winch.
3. Place the spare tire near to the winch cable. Hold the
spare upright so that the tire's tread is on the ground and
the valve stem is at the top of the wheel and facing away
from the rear of the vehicle.