Specifications; General; Lcd Panel; Input/Output Terminals - JVC DT-V24G11Z Instructions Manual

Multi format lcd monitor
Table of Contents

Advertisement

Specifications

7 General

Model name
Type
Multi format LCD monitor
Screen size
Type 24 wide format
Aspect ratio
16:10
Horizontal/vertical frequency
H: 31.469 kHz – 75.000 kHz
(computer signal)
V: 48 Hz – 65 Hz
* Some signals within this frequency range may not be displayed ("Out of
range" is displayed).
Compliant video signal format ☞ "Available signals" on page 10
Format
3G SDI: SMPTE424M/SMPTE425M
DUAL LINK HD SDI:
SMPTE372M
HD SDI: BTA S-004C, SMPTE292M
SD SDI: ITU-R BT.656: 525/625
SMPTE259M: 525
EMBEDDED AUDIO:
SMPTE299M, SMPTE272M
CLOSED CAPTION:
EIA/CEA-608, EIA/CEA-708
Audio output
Internal speaker: 1.0 W + 1.0 W
Operating conditions
Operating temperature: 5°C – 35°C (41°F – 95°F)
Operating humidity: 20% – 80% (non-condensing)
(Slightly variable depending on ambient conditions for installation.)
Power requirements
AC 120 V, 50 Hz/60 Hz
Rated current
1.15 A
External dimensions
Width:
(excluding protruding parts)
564 mm (22 1/4˝)
Height:
448.6 mm (17 3/4˝) 408 mm (16 1/8˝)
Depth:
243 mm (9 5/8˝)
(with the stand)
Weight
11.5 kg (25.3 lbs) (with the stand)
8.6 kg (18.9 lbs) (without the stand)
Accessories
AC power cord, Power cord holder x 1, Screw x 2 (for power cord holder)
Notice on transportation
This monitor is precision equipment and needs dedicated packing material for transportation.
Never use any packing material supplied from sources other than JVC or JVC-authorized dealers.
• For easy understanding, pictures and illustrations are shown by being emphasized, omitted or composed,
and may be slightly different from actual products.
• Design and specifications are subject to change without notice.
• All company names and product names mentioned herein are used for identification purposes only, and
may be the trademarks or registered trademarks of their respective companies.
DT-V24G11Z
DT-V20L3GZ
Type 20 wide format
1.00 A
Width:
564 mm (22 1/4˝)
477 mm (18 7/8˝)
Height:
394.6 mm (15 5/8˝) 354 mm (14˝)
Depth:
99 mm (4˝)
243 mm (9 5/8˝)
(without the stand)
(with the stand)
10.6 kg (23.3 lbs) (with the stand)
7.7 kg (16.9 lbs) (without the stand)

7 LCD panel

Model name
Type
Effective screen size
Number of pixels displayed
Number of colors displayed
Viewing angle (TYP.)
Brightness (TYP.)
Contrast ratio (TYP.)

7 Input/output terminals

Model name
VIDEO (INPUT 1)
VIDEO (INPUT 2)
DVI-D (HDCP)
COMPO./RGB (G/Y, B/P
R/P
/R-Y)
R
477 mm (18 7/8˝)
EXT.SYNC (CS)
99 mm (4˝)
(without the stand)
E. AUDIO HD/SD SDI (IN 1)
E. AUDIO HD/SD SDI (IN 2)
E. AUDIO HD/SD SDI
(SWITCHED OUT)
AUDIO ASSIGN (IN 1)
AUDIO ASSIGN (IN 2)
AUDIO ASSIGN
(MONITOR OUT)
REMOTE (MAKE/TRIGGER)
REMOTE (RS-485)
REMOTE (RS-232C)
DT-V24G11Z
24˝ wide, active matrix TFT
20˝ wide, active matrix TFT
Width:
518.4 mm (20 1/2˝)
Width:
Height:
324 mm (12 7/8˝)
Height:
1 920 x 1 200
1 680 x 1 050
16.77 million
178° (Horizontally), 178° (Vertically)
178° (Horizontally), 178° (Vertically)
2
400 cd/m
470 cd/m
1000:1
700:1
DT-V24G11Z
Input/output of composite signal:
2 line, BNC connector x 4,
1 V(p-p), 75 Ω
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination).
DVI-D signal input (compatible with HDCP):
DVI-D connector x 1 (compatible with DDC2B)
/B-Y,
Input/output of analog component signal/analog RGB signal:
B
1 line, BNC connector x 6
G/Y: 1 V(p-p), 75 Ω (including sync signal)
B/P
/B-Y, R/P
/R-Y: 0.7 V(p-p), 75 Ω
B
R
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination).
Input/output of composite sync signal:
1 line, BNC connector x 2,
0.3 V(p-p) – 4 V(p-p),
75 Ω (tri-level sync, negative polarity sync (bi-level), and BB)
(including no video signal)
* The input (IN) and output (OUT) terminals are bridge-
connected (auto termination).
Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals):
auto detection, 2 line, BNC connector x 2
Digital signal output (compatible with EMBEDDED AUDIO signals):
1 line switched out, BNC connector x 1
Analog audio signal input:
2 line, RCA connector x 4,
500 mV (rms), high impedance
Analog audio signal output:
1 line, RCA connector x 2,
500 mV (rms)
☞ "Using the MAKE/TRIGGER system" on page 21
☞ "Using the serial communication" on page 22
26
DT-V20L3GZ
433.4 mm (17 1/8˝)
270.9 mm (10 3/4˝)
2
DT-V20L3GZ

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dt-v20l3gz

Table of Contents