Care And Cleaning - HP 1280 - Ultra VGA - 17" CRT Display User Manual

Care and Cleaning

Do not place anything on top of the display. Doing so may block the
display vents and cause damage to the display due to overheating.
Do not let liquid get on or into the display.
To maximize screen life and prevent damage to the picture tube (such
as burned phosphor due to leaving the same image on the screen for a
long time), it is recommended that you:
Use the display power management system (on HP Vectra PCs) or a
•
screen saver program.
Avoid setting contrast and brightness to their maximum levels for
•
prolonged periods.
If you do not have a power management system or a screen saver
•
program, switch the display off or reduce the brightness and contrast
to minimum levels when the display is not in use.
Your display has an anti-glare, anti-static screen coating. To prevent
damage to the display screen's coating, use a regular household glass
cleaner when cleaning the screen. To clean the screen:
1 Switch the display off and remove the power plug (pull the plug, not
the cable).
2 Wet a soft cotton cloth with the cleaning solution and gently wipe the
screen. Do not spray cleaner onto the screen because the cleaner
may drip inside the display.
3 Dry with a clean, soft cotton cloth.
Do not use cleaning solutions containing fluoride, acids, or alkalis.
HP Ultra VGA 1280 User's Guide
Care and Cleaning
English 11