Dell E1913 Safety Information Manual page 4

Safety, Environmental, and Regulatory Information
•
Do not allow your portable computer or adapter to operate
with the base resting directly on exposed skin for extended
periods of time. The surface temperature of the base will
rise during normal operation, particularly when AC power
is present. Allowing sustained contact with exposed skin
can cause discomfort or burn.
•
Contact Dell (or an authorized dealer or service
center for retail purchases) if your equipment does
not operate normally.
When Working Inside Your
Device
Do not attempt to service the equipment yourself, except as
explained in your Dell documentation or in instructions
otherwise provided to you by Dell.
Always follow installation and service instructions closely.
Some internal components, such as PC Cards, may become
very warm during normal operation. Before touching any
internal components, allow time for them to cool.
Disconnect all cables from the portable computer including
the phone cable before opening the memory/modem
access door.
This product may contain Optical Disk Drives (ODD), such as a
CD-ROM, CDR/W, DVD drive, etc., which have built-in laser
devices. To prevent any risk of exposure to laser radiation,
do not disable or open any ODD assembly for any reason.
4
These ODDs comply with safety requirements and are
classified as Class 1 Laser Products, under the US DHHS
Standard and IEC/EN60825-1 Laser Safety Standard.
These ODD devices contain no user adjustments nor any
user serviceable or replaceable parts.
NOTE: Additional user information for your optical storage
device may be available under the "Manuals" section at
support.dell.com.
WARNING: Hazardous moving parts. Keep away from the
moving fan blades.
NOTE: The fan module in your computer may not look
exactly like the one shown in the illustration above.