JVC KW-NX7000BT - Navigation System With DVD player Instructions Manual page 107

Navigation / dvd receiver
Hide thumbs Also See for KW-NX7000BT - Navigation System With DVD player:
Table of Contents

Advertisement

Available languages

Available languages

Menu items
2
Down Mix *
D. (Dynamic) Range
Compres. (Compression) *
3
IF Band Width *
Area Setting
4
Sirius ID *
5
AV Input *
2
*
Selectable only for "DISC", "SD", and "USB." (Playback stops when you change the setting.)
3
*
Appears only when an HD Radio tuner box is connected.
4
*
Appears only when a SIRIUS Satellite Radio is connected.
5
*
Not selectable when "AV-IN" is selected as the source.
Selectable settings, [reference page]
When playing back a multi-channel disc, this setting affects the signals
reproduced through the LINE OUT terminals.
Dolby Surr. : Select this to enjoy multi-channel surround audio by
connecting an amplifier compatible with Dolby Surround.
Stereo : Normally select this.
You can enjoy a powerful sound at a low volume level while playing
2
Dolby Digital software.
Auto: Select to apply the effect to multi-channel encoded software.
On: Select to always use this function.
Auto: Increases the tuner selectivity to reduce interference noises
between adjacent stations. (Stereo effect may be lost.)
Wide: Subject to the interference from adjacent stations, but sound
quality will not be degraded and the stereo effect will remain.
US : When using in North/Central/South America. FM/AM intervals are
set to 200 kHz/10 kHz.
Europe : When using in any other areas. FM/AM intervals are set to
50 kHz (100 kHz during auto search)/9 kHz.
SA : When using in South American countries where FM interval is
100 kHz. AM interval is set to 10 kHz.
Your SIRIUS identification number appears on the monitor.
You can determine the use of LINE IN and VIDEO IN terminals. ☞ [100]
Off: Select when no component is connected ("AV-IN" is skipped while
selecting the source).
iPod (Off): Select when connecting the iPod using the USB Audio and
Video cable for iPod. ☞ [96]
Audio&Video: Select when connecting an AV component such as a VCR.
Audio: Select when connecting an audio component such as a portable
audio player.
107
The procedure for setting an item is shown on page 16.
AV OPERATIONS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kw-nx7000

Table of Contents