JVC KW-NX7000BT - Navigation System With DVD player Instructions Manual page 95

Changing HD Radio reception
mode
While receiving an HD Radio broadcast, the unit tunes
to digital or analog audio automatically due to the
receiving condition.
1
2
3
Mode
Mono
Local / DX
SSM
Blend Hold
Back
Auto Switch between digital and
analog audio automatically
Digital Tuning to digital audio only
Analog Tuning to analog audio only
• If no sound can be heard from the selected setting,
change the setting to <Analog> or <Digital>.
• The setting automatically changes to <Auto> if you
tuned in to or change to another station, or if you
turned off the power.
• This setting cannot take effect for the conventional
FM/AM stations.
• If the radio station forces the reception mode to
digital, the DIGITAL indicator flashes.
CHANNEL
Exit
Local DX
Start
Auto Digital Analog
Exit
Tuning in to stations with
sufficient signal strength
This function works only for FM bands. Once you have
activated this function (selected <Local>), it always
works when searching for FM stations.
1
2
3
Mode
Mono
Local / DX
SSM
Blend Hold
Back
Only stations with sufficient signal strength will be
detected.
• The DX indicator goes off, then the LO indicator
lights up.
95
CHANNEL
Exit
Local DX
Start
Auto Digital Analog
Exit
AV OPERATIONS