Servicing Your Transceiver; Specifications - Uniden BEARCAT 980 Owner's Manual

Problem
Unit does not work as well as
previously.
Battery power check returned
FAILLO FAILHI
or
Antenna check returned
RF power diagnosis check
FAIL
returned .
If you do not get satisfactory results after performing these checks, call
the Uniden Customer Service Center at 1-800-297-1023, 8:00 a.m. to 5:00
p.m. CST, Monday through Friday.

serviCing yoUr transCeiver

Technical information, diagrams, and charts are provided on request. It
is the user's responsibility to see that this radio is operating at all times
in accordance with the FCC Citizens Radio Service regulations. We highly
recommend that you consult a qualified radio/telephone technician for
servicing and aligning this CB radio product.
When ordering parts, be sure to specify the correct model number and serial
number of the unit.

speCiFiCations

Channel:
Frequency Range:
.
FAIL
.
Suggestion
Turn the power off then back on. The channels
will reset.
Make sure your power wires have a good
connection.
Check your battery charge; it needs to be fully
charged. Lower voltage will cause a failure.
Check your alternator.
Make sure your antenna ground is good.
Check for damage to the antenna.
Check the SWRs at a CB shop. High SWRs will
damage the radio.
Make sure your antenna ground is good.
Check for damage to your antenna.
Check the antenna connection on the back of
the radio. Be sure it is tight.
general
40 AM/USB/LSB
CB : 26.965 - 27.405 MHz
WX : 162.400 - 162.550 MHz
E-18