Description Of Personal Functions - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Description of Personal Functions

A description of the content of each Personal Function is given below in
the order of their function numbers.
The shown in this section provides a brief description of the
Custom Function setting for the respective function. For more details,
refer to "Custom Function Settings" in the camera's Instruction Manual
provided with your camera.
Disables the shooting modes
P.Fn-01
Checkmark the shooting modes you do not want to use.
Unwanted shooting modes can be skipped while you are selecting the
shooting mode.
This makes selecting the desired shooting mode faster.
With the 1Ds 1D , [Disable depth-of-field AE] is also
displayed.
At least one checkbox must be left unchecked.
Disables the metering modes
P.Fn-02
Checkmark the metering modes you do not want to use.
Unwanted metering modes can be skipped while you are selecting
the metering mode.
This makes selecting the desired metering mode faster.
At least one checkbox must be left unchecked.
Specifies the metering mode for manual
P.Fn-03
exposure
Select the metering mode to be specified.
You can specify the metering mode to be used in the manual
exposure mode.
When you set the manual exposure mode, the metering mode
selected here will be set automatically. In the manual exposure mode,
this enables you to use a metering mode different from the one used
in the AE modes.
Sets the maximum and minimum shutter speeds
P.Fn-04
to be used
Select the maximum and minimum shutter speeds from the list box.
For example, if you set 1/2000 sec. as the fastest shutter speed and
1/60 sec. as the slowest, the shutter speed range will be 1/2000 to 1/
60 sec.
This makes shutter speed selection faster and prevents a slow-speed
sync. in aperture-priority AE mode with the flash.
If you set the maximum and/or minimum shutter speed to one that
is not a full-stop increment (such as 1/750 sec.), the controllable
and settable shutter speed range might not be as exact as you
set it (A slight deviation may occur.). This applies if you also set
Custom Function C.Fn-6-1 and C.Fn-6-2 and set the maximum
and/or minimum shutter speed to one that is not a full-stop
increment (such as 1/3200 sec.).
To ensure that a proper flash sync speed is set in the Program AE
mode, a shutter speed range of 1/200 sec. to 1/80 sec. cannot be
set with the
1D Mk II N 1Ds Mk II
1/400 sec. to 1/80 sec. cannot be set with the
If safety shift has been enabled (with C.Fn-16), it will override
P.Fn-04's shutter speed range.
, and the range of
1D Mk II 1Ds
.
1D
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
32 32