Canon EOS 5D - Focusing Screen Ee-A Instruction Manual page 52

If there is insufficient charge left in the camera battery, the camera
cannot communicate with EU. Either replace with a fully charged
battery or use the DC coupler kit provided with the 1D series,
or an AC adaptor kit (sold separately) for other
D60 D30
camera models. Your computer does not supply power to the camera
through the interface cable.
For camera models other than the
the LCD monitor. You cannot communicate with the camera when you
are displaying images through the camera's LCD monitor. Always
connect the camera and your computer after turning off the display in
the LCD monitor.
, turn off
30D REBELXTi 400D
Communication between EU and the camera disconnected
Operation of the Auto power off function will automatically switch the
camera off, disabling communication with EU, if you turn the Auto
power off function to [ON]. Remove the checkmark from [Auto power
off] in the [Basic settings] tab sheet of the preferences or set the Auto
power off function in the camera to [OFF].
If you do not perform any operation while the camera and computer
are connected, depending on the computer system, a confirmation
message may appear on the screen asking whether you wish to
continue communicating with the camera. If you do not perform any
operation after this message appears, communication with the
camera is terminated. To re-establish communication, press the
shutter button down halfway or set the camera's power switch to
< OFF > and then back to < ON >.
Do not put your computer to sleep while it is connected to the camera.
If your computer goes into sleep mode, never disconnect the interface
cable while your computer is still in sleep mode. Always wake your
computer up while it is still connected to the camera. Depending on
the type of computer, disconnecting the interface cable while your
computer is in sleep mode could prevent the computer from waking
up correctly. Refer to the computer User's Manual for more
information on sleep mode.
Remotely shot images using EU do not display in DPP
In Digital Photo Professional, select the [Tools] menu
with EOS Utility].
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
[Sync folder
51 51