Shooting By Operating The Camera; Timer-Controlled Shooting; Interval Timer Shooting; Timer Shooting - Canon EOS 5D - Focusing Screen Ee-A Instruction Manual

Shooting by Operating the Camera

Even when remote shooting is set, you can still operate the camera and
shoot – as when shooting with only the camera. Also, since the shot
images are saved to your computer's hard disk, you can shoot large
quantities without having to worry about the capacity of the memory
card.
You can check the shot images immediately in Digital Photo
Professional (hereinafter DPP), which is linked to start up automatically.
1 Display the camera settings/remote shooting
window .
(p.42)
2 Set the camera.
Specify the necessary settings for shooting by operating the
camera.
The display of EU's camera settings/remote shooting window
changes according to the settings.
3
Press the camera's shutter button and take a shot.
The shot images are transferred to the computer, DPP starts up
automatically, and the shot images are displayed.

Timer-controlled Shooting

Two types of timer shooting are available where the camera
automatically takes shots at a specified time or a specified number.

Interval Timer Shooting

You can automatically take shots by setting the interval between shots
and the number of shots to be taken.
1
Select the [Tool] menu
The [Timer shooting settings] dialog box appears.
2 Checkmark [Interval timer shooting].
3
Enter the shooting interval and the number of shots.
Enter a value between 5 seconds and 99 minutes and 59
seconds in one-second increments.
The minimum number of interval-timed shots is two. The number
of shots you can take at timed intervals depends on the available
space on your computer's hard disk.
4
Click the [Start] button.
The shots are taken at the specified intervals and for the
specified number of shots.
On some types of computer, if you set a short interval between
shots and there is insufficient time to transfer and save the images,
it may not be possible to take shots at the specified interval. In this
case, set a longer interval between shots and take the shots again.

Timer Shooting

You can automatically take a shot when the specified time elapses.
1
Select the [Tool] menu
The [Timer shooting settings] dialog box appears.
2 Enter a delay time and click the [Start] button.
Enter a value between 0 seconds and 99 minutes and 59
seconds in one-second increments.
The shot is taken when the specified time elapses.
[Timer shooting].
[Timer shooting].
Introduction
Contents at
a Glance
1
Downloading
Images
2
Camera
Settings
3
Remote
Shooting
4
Preferences
Reference
Index
44