Table of Contents
Advertisement
Note: If your vehicle is not equipped
with DIC steering wheel buttons, press
the trip odometer reset stem located in
the instrument panel cluster to select
the information. Hold the stem for four
seconds to reset trip odometers.
Fuel Information Button
• Press to scroll through the range,
average fuel economy, instant fuel
economy and the GM Oil Life
System
TM
.
• RANGE estimates the remaining dis-
tance you can drive without refueling.
Range is based on recent fuel econo-
my and the fuel remaining in the tank.
• AVG. ECON calculates how many
miles per gallon you are getting
based on overall driving conditions.
Press and hold the Select button
while AVG. ECON is displayed and
the DIC will begin calculating the
average fuel economy from that point
in time.
• INST. ECON calculates how many
miles per gallon you are getting at a
particular moment.
• ENGINE OIL LIFE calculates an esti-
mate (percentage) of the engine oil's
remaining useful life. It also will alert
you when it is time to change your oil
by illuminating the CHANGE ENG
OIL light on your instrument panel.
Please remember to always reset the
oil life system after an oil change. To
reset the Engine Oil Life monitor,
press and hold the Select button for
four seconds while ENGINE OIL LIFE
is displayed. When successful, the
DIC will display ENGINE OIL LIFE:
100%.
Personalization Button
• Press the Personalization button
once and the current driver will be
displayed. Any changes made will
affect only the displayed driver.
Press this button again to scroll
through and set the personalization
features.
Select Button
• Press to scroll through the menu
choices for each personalization
feature. Finalize your choice by
pressing the button while it is
displayed on the DIC and move on
to the next feature.
• The personalization features can be
reset to their default mode by holding
the Trip Information button and the
Personalization button down for four
seconds.
Language Options
• If you find that the unit displays a lan-
guage other than the one you prefer
and you are unable to change it, hold
the Trip and Personalization buttons
down until the display begins cycling
through the three available lan-
guages. Release the buttons when
you see the preferred language.
Note that this will reset this driver's
personalization settings to the factory
default setting.
Displaying Driver Preferences
• The driver preferences are recalled
by pressing any button on the
Remote Keyless Entry System
transmitter or by pressing the
appropriate memory button (1 or 2)
located on the driver's door. The last
value displayed for each preference
is saved automatically.
See Section 3 of your Owner Manual.
15
Advertisement
Table of Contents
