Torque Values - DAELIM ET-300 Service Manual

1-5 Torque Values

STANDARD
● 5 mm bolt and nut
● 6 mm bolt and nut
● 8 mm bolt and nut
●10 mm bolt and nut
●12 mm bolt and nut
ENGINE
● Cylinder head nut
● Spark plug
● Cylinder head bolt
● Alternator bolt
FRAME
● Handlebar upper holder bolt
● Throttle housing cover screw
● Steering shaft nut
● Steering shaft holder bolt
● Wheel rim bolt
● Tie rod lock nut
● King pin nut
● Handlebar lower holder nut
● Front wheel bolt
● Front axle castle nut
● Front brake arm nut
● Rear brake arm nut
● Rear axle castle nut
● Rear wheel bolt
● Exhaust muffler mounting bolt
● Engine hanger bolt
● Rear axle holder bolt
● Swing arm pivot nut
● Rear shock absorber mounting nut
Nuts, Bolts Tightness
Perform periodical maintenance in accord with the Periodical Maintenance Schedule Check if all
bolts and nuts on the frame are tightened securely.
Check all fixing pins, snap rings, hose clamp, and wire holders for security.
5 N.m (3.5 lbf.ft)
10 N.m (7.2 lbf.ft)
22 N.m (16 lbf.ft)
35 N.m (25 lbf.ft)
55 N.m (40 lbf.ft)
38 N.m (27.4 lbf.ft)
12 N.m (8.9 lbf.ft)
15 N.m (10.1 lbf.ft)
8 N.m (5.9 lbf.ft)
24 N.m (17.7 lbf.ft)
4 N.m (2.9 lbf.ft)
50 N.m (36.9 lbf.ft)
33 N.m (24 lbf.ft)
18 N.m (13.3 lbf.ft)
35 N.m (25.8 lbf.ft)
40 N.m (29 lbf.ft)
40 N.m (29.5 lbf.ft)
24 N.m (17.7 lbf.ft)
40-60 N.m (30-45 lbf.ft)
4 N.m (3.0 lbf.ft)
7 N.m (5.2 lbf.ft)
40-60 N.m (30-45 lbf.ft)
24 N.m (17.7 lbf.ft)
30 N.m (22.1 lbf.ft)
30 N.m ( 22 lbf.ft)
90 N.m (65 lbf.ft)
90 N.m (65 lbf.ft)
45 N.m (33 lbf.ft)