DAELIM ET-300 Service Manual page 125

Install the new inner seal onto the right crankcase.
Special tools:
Water pump oil seal driver (inner)
Install a new outside bearing to the right crankcase cover.
Special tools:
Water pump bearing driver (6901)
Caution
Do not reuse old bearing. It must be
replaced with a new one once it has
been removed.
Mount the water pump shaft and the inner bearing to the
right crankcase cover.
Install the cir clip to hold the inner bearing.
Water pump bearing
driver (6901)
Inner bearing
Water pump shaft
Water pump oil seal
driver (inner)