TP-Link TL-WR720N User Manual page 25

Current SSID – The router supports multi-SSID and you can choose one SSID which you
want to configure its WPS function from the drop-down list. For example, if your wireless
client wants to connect to one of the router's SSID "TP-LINK_E3C860" by WPS，you should
select TP-LINK_E3C860 as Current SSID.
WPS Status - Enable or disable the WPS function here.
Current PIN - The current value of the Router's PIN is displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN - Restore the PIN of the Router to its default.
Gen New PIN - Click this button, and then you can get a new random value for the Router's
PIN. You can ensure the network security by generating a new PIN.
Add device - You can add a new device to the existing network manually by clicking this
button.
b). To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function meanwhile.
I. Use the Wi-Fi Protected Setup Button
Use this method if your client device has a Wi-Fi Protected Setup button.
Step 1: Press the WPS button on the back panel of the Router.
You can also keep the default WPS Status as Enabled and click the Add device button
in Figure 4-2, then Choose "Press the button of the new device in two minutes" and
click Connect. (Shown in the following figure)
TL-WR720N
Figure 4-2 WPS
-17-
150Mbps Wireless N Router