Panel Layout; The Front Panel - TP-Link TL-WR720N User Manual

1.4

Panel Layout

1.4.1

The Front Panel

The Router's LEDs and the WPS button are located on the front panel (View from left to right).
Name
（Power）
(System)
(WLAN)
(LAN1,2)
(WAN),
Slow Flash
(WPS)
Quick Flash
Note:
After a device is successfully added to the network by WPS function, the WPS LED will keep on
for about 5 minutes and then turn off.
Figure 1-1 Front Panel sketch
Status
Off Power is off.
On Power is on.
Flashing The Router is working properly.
On /Off The Router has a system error.
Off The Wireless function is disabled.
Flashing The Wireless function is enabled.
Off There is no device linked to the corresponding port.
There is a device linked to the corresponding port but
On
there is no activity.
Flashing There is an active device linked to the corresponding port.
A wireless device is connecting to the network by WPS
function. This process will last in the first 2 minutes.
A wireless device has been successfully added to the
On
network by WPS function.
A wireless device failed to be added to the network by
WPS function.
Table 1-1 The LEDs description
TL-WR720N 150Mbps Wireless N Router
Indication
-4-