Dhcp; Dhcp Settings - TP-Link TL-WR541G - Wireless Router User Manual

If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
Note: This page will be refreshed automatically every 5 seconds.

4.6 DHCP

Figure 4-21 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 4-21): DHCP Settings,
DHCP Clients List and Address Reservation. Click any of them, and you will be able to
configure the corresponding function. The detailed explanations for each submenu are provided
below.

4.6.1 DHCP Settings

The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.
The DHCP Server can be configured on the page (shown in Figure 4-22):
DHCP Server - Enable or Disable the DHCP server. If you disable the Server, you must
have another DHCP server within your network or else you must manually configure the
computer.
Start IP Address - This field specifies the first of the addresses in the IP address pool.
Figure 4-22 DHCP Settings
37