Table of Contents
Advertisement
step.)
5.
Connect the DSL/Cable Modem to the WAN port on the router, shown in Figure 2-1.
6.
Connect the AC power adapter to the AC power socket on the router, and the other end into
an electrical outlet. The router will start to work automatically.
7.
Power on your PC and Cable/DSL Modem.
Figure 2-1 Hardware Installation of the TL-WR541G 54Mbps Wireless Router
Chapter 3. Quick Installation Guide
After connecting the TL-WR541G Router into your network, you should configure it. This chapter
describes how to configure the basic functions of your TL-WR541G Wireless Router. These
procedures only take you a few minutes. You can access the Internet via the router immediately
after successfully configuring.
3.1 TCP/IP configuration
The default IP address of the TL-WR541G 54Mbps Wireless Router is 192.168.1.1. And the
7
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the TL-WR541G - Wireless Router and is the answer not in the manual?
Questions and answers