Symantec WINDOWS INSTALLER EDITOR 7.0 SP2 - REFERENCE FOR WISE INSTALLATION STUDIO V1.0 Installation Manual page 363

Windows Installer Editor Reference
Example: Enter SourceFiles in the Name field and enter C:\Development in the
Value field. The directory path you enter here can be changed by command-
line options during compile.
To point source directories to the value of the property
1. Select Tools menu > Convert Source Paths.
The Convert Source Paths dialog box appears.
2. Select the source directory to change dynamically.
3. Click Change Selected Path.
The Change Selected Path dialog box appears.
4. Complete the dialog box:
Change to
Enter the name of the property, surrounded by square brackets. The property
name is case-sensitive. Example: [SourceFiles].
You can add other directories to the end of the property name to create other
locations. Example:
[SourceFiles]Libraries\Visual Basic
[SourceFiles]Libraries\C++
Change Sub-Directories
Mark this to change the subdirectories of the current directory.
5. Click OK.
The Change Source Directories to column displays the property name in brackets.
6. Click OK.
To change the source directory by compiling from the command line
1. Select Windows Start menu > Run.
The Run window appears.
2. Enter the following:
The path of the WfWI.exe program.
The path to the .WSI or .MSI to be compiled.
The command-line options to compile and set the property value.
Example: "C:\Program Files\Windows Installer Editor\WfWI.exe"
C:\Installers\Application.wsi /c /p SourceFiles="E:\Development\"
See About Command Lines
page 359.
on page 251 and Source Paths in an Installation
Working With Source Paths
on
363