Symantec WINDOWS INSTALLER EDITOR 7.0 SP2 - REFERENCE FOR WISE INSTALLATION STUDIO V1.0 Installation Manual page 243

Windows Installer Editor Reference
It is very important to change volume labels for your disks or CDs to match this
value. Failing to do so will prevent the installation from working properly.
Disk Name
CD 1
6. Click OK.
7. In the Media Destinations section, click Add again. The Media Destination Details
dialog box appears.
8. Make the following entries for the second CD:
Destination Directory
C:\My Installation\CD 2
Volume Label
CD Two
Disk Name
CD 2
9. Click OK.
10. In the Include Features/Components list, click Add and select the features and
components to compress.
11. Click OK.
The next steps are for the second media item.
12. On the Media page, click Add. The Media Details dialog box appears.
13. Complete the dialog box.
Media Name
Enter a name for the second media item. Example: Uncompressed Files.
Compression Option
Select Uncompressed external files.
Share media destination/size info with previous media entry.
Mark this check box.
Include Features/Components section
Click Add and select the features and components to leave uncompressed.
14. Click OK.
After compile, the destination directory CD 1 contains the .CAB file and as many
uncompressed files as can fit on the CD. All remaining uncompressed files are in the
directory CD 2.
Organizing Your Installation Into Releases
243