THUNDER TIGER TITAN X50 Instruction Manual page 8

Main Rotor-2 /
Bag B
No. Material No. Description
1 BK0077 COLLAR,d3xD4xW6
2 HSA3-10 BUTTON HEAD SOCKET SCREW,M3x10
3
BK0002 FLYBAR CONTROL ARM
4 BK0005-1 FLYBAR ARM BUSHING
5 BK0649-2 LINKAGE BALL(B)
BK0077
COLLAR,d3xD4xW6
軸環,d3xD4xW6
HSA3-10
BUTTON HEAD SOCKET SCREW,M3x10
半圓頭內六角螺絲,M3x10
BK0649-2
LINKAGE BALL(B)
內六角連接頭自攻螺絲(B)
HME4-5B
SET SCREW,M4x5
無頭內六角螺絲,M4x5
HME3-10B
SET SCREW,M3x10
無頭內六角螺絲,M3x10
Apply threadlocker
使用螺絲防鬆膠
L
Assemble left and right side the same way
R
左右側組件相同
110mm
名稱
軸環,d3xD4xW6
半圓頭內六角螺絲,M3x10
穩定翼轉臂
轉臂六角襯套
內六角連接頭自攻螺絲(B)
Step 2 / 步驟二
1. Secure the Metal Mixing
Lever to the Metal Seesaw
Hub.
2. Make sure the Metal Mixing
Lever runs effortlessly.
1. 將金屬控制臂安裝於金屬穩定
桿固定座，並適量使用螺絲防
鬆劑。
2. 確認控制臂能自由動作，無干
涉及過鬆現象。
Step 1 / 步驟一
1. Secure the Linkage Ball to the Metal Flybar
Contorl Arm.
2. Assemble the Metal Flybar Control Post and the
Flybar Control Arm.
1. 牢固的將球頭安裝於金屬穩定翼轉臂上。
2. 將金屬穩定翼轉臂柱及穩定翼臂裝配完成。
(4)
(5)
(9)
(8)
110mm
-2
Qty No. Material No. Description
2 6 HME4-5B
2 7 BK0631
8
2 HME3-10B
2 9 BK0067L
2
(2)
(1)
T22
T22
(6)
(3)
Step 3 / 步驟三
1. Thread the Paddles onto the Flybar Rod, equal the length to the Flybar
Control Arms of each side.
2. Ensure the leading edges of the Paddles are toward the same side to the
Metal Flybar Control Posts.
3. Line up the Paddles with the Flybar Control Arms.
1. 旋上穩定翼於穩定翼桿上，確認兩側的穩定翼至控制臂距離相等。
2. 確認穩定翼前緣與穩定翼控制轉臂方向相同。
3. 對正穩定翼與穩定翼控制臂呈水平狀態。
-7-
SET SCREW,M4x5
SUS FLYBAR
SET SCREW,M3x10
FLYBAR PADDLE(BLUE)
Completed View
組裝完成
(1)
(2)
T22
Step 2 / 步驟二
1. Insert the Flybar Rod through the Flybar Control
Arms & the Metal Seesaw Hub.
2. Ensure the Flybar Rod have equal protrusion from
each side of the Metal Flybar Control Post.
3. Line up the holes of the Flybar Control Arms and
the flat spot of the Flybar Rod, and then screw
the Flybar Control Arms & the Flybar Rod tightly.
1. 將穩定桿穿過穩定翼控制臂、金屬穩定桿固定座和金屬
旋翼固定座。
2. 確認穩定桿凸出金屬穩定翼控制臂柱兩側等距。
3. 對正穩定翼控制臂上鎖固孔與穩定翼桿上平面凹槽後，
再鎖緊螺絲。
(7)
(8)
Qty
名稱
無頭內六角螺絲,M4x5 2
穩定桿 1
無頭內六角螺絲,M3x10 2
穩定翼(藍) 2
(9)