Product Specifications - Cisco AIR-LAP1242AG-A-K9 Datasheet

All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Feature
Temperature
Multipurpose and Lockable
Mounting Bracket
Both Local and Inline Power
Supported, Including IEEE
802.1af PoE
Hardware-Assisted AES
Encryption
Summary
Cisco Aironet 1240AG Series Access Points feature antenna connectors for greater range and
coverage versatility using a broad selection of available Cisco antennas, as well as a rugged metal
housing for operation over extended temperature ranges typical of industrial environments. Dual
802.11a and 802.11g radios offer a combined capacity of 108 Mbps, meeting the performance
requirements of the most demanding applications, while hardware-assisted AES encryption
provides uncompromised support for interoperable IEEE 802.11i and WPA2 security. The Cisco
Aironet 1240AG Series delivers enterprise-class features for challenging RF environments.

Product Specifications

Table 2 lists the product specifications for Cisco Aironet 1240AG Series Access Points.
Table 2. Product Specifications for Cisco Aironet 1240AG Series Access Points
Item Specification
Part Number AIR-AP1242AG-x-K9
AIR-LAP1242AG-x-K9
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify
approval and to identify the regulatory domain that corresponds to a particular country, please
visit:
Not all regulatory domains have been approved. As they are approved, the part numbers will
be available on the Global Price List.
Software
Data Rates Supported
Network Standard
Uplink
Benefit
Provides greater flexibility in installation options for site surveys, as well as theft
deterrence.
Power can be supplied using the Ethernet cable, eliminating the need for costly
electrical power line runs to remotely installed access points. The access points can be
powered by IEEE 802.3af PoE, Cisco inline power switches, single port power
injectors, or local power.
Provides high security without performance degradation.
A = FCC
C = China
E = ETSI
I = Israel
J = Japan
K = Korea
N = North America (excluding FCC)
P = Japan2
S = Singapore
T = Taiwan
http://www.cisco.com/go/aironet/compliance
Cisco IOS Software Release 12.3(8)JA or later (autonomous).
Cisco IOS Software Release 12.3(11)JX or later (Lightweight Mode).
Cisco Unified Wireless Network Software Release 4.0 or later.
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
IEEE 802.11a, 802.11b, and 802.11g
Autosensing 802.3 10/100BASE-T Ethernet
Data Sheet
Page 4 of 9