Advertisement
The Cisco Aironet 1040 Series is a component of the Cisco Unified Wireless Network, which can scale to up to
18,000 access points with full Layer 3 mobility across central or remote locations on the enterprise campus, in
branch offices, and at remote sites.
Cisco Aironet 1040 Series Access Points come with a Limited Lifetime Hardware Warranty that includes 10-day
advance hardware replacement.
Product Specifications
Table 1 lists the product specifications for Cisco Aironet 1040 Series Access Points.
Table 1.
Item
Part Numbers
Software
802.11n
Data Rates Supported
1
MCS Index: The Modulation and Coding Scheme (MCS) index determines the number of spatial streams, the modulation, the
coding rate, and data rate values.
2
GI: A Guard Interval (GI) between symbols helps receivers overcome the effects of multipath delays.
© 2010 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Product Specifications for Cisco Aironet 1040 Series Access Points
Specification
Cisco Aironet 1040 Series Access Point
● AIR-LAP1042N-x-K9: Dual-band Controller-based 802.11a/g/n
● AIR-LAP1041N-x-K9: Single-band Controller-based 802.11g/n
● AIR-AP1042N-x-K9: Dual-band Standalone 802.11a/g/n (available in Q4CY10)
● AIR-AP1041N-x-K9: Single-band Standalone 802.11g/n (available in Q4CY10)
● AIR-LAP1042-xK9-10: Eco-pack (dual-band 802.11a/g/n) 10 quantity controller-based access points
● AIR-AP1042-xK9-5: Eco-pack (dual-band 802.11a/g/n) 5 quantity standalone access points (available in Q4CY10)
Regulatory domains: (x = regulatory domain)
Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the
regulatory domain that corresponds to a particular country, please visit: http://www.cisco.com/go/aironet/compliance.
Not all regulatory domains have been approved. As they are approved, the part numbers will be available on the Global
Price List.
● Cisco Unified Wireless Network Software Release 7.0 or later
®
● Cisco IOS
Software Release to follow (available in Q4CY10)
● 2x2 multiple-input multiple-output (MIMO) with two spatial streams
● Maximal ratio combining (MRC)
● 20- and 40-MHz channels
● PHY data rates up to 300 Mbps
● Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx)
● 802.11 dynamic frequency selection (DFS) (Bin 5)
● Cyclic shift diversity (CSD) support
802.11a: 6, 9, 12, 18, 24, 36, 48, and 54 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n data rates (2.4 GHz and 5 GHz):
1
MCS Index
0
1
2
3
4
5
6
7
8
9
10
2
GI
= 800ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
6.5
13.5
13
27
19.5
40.5
26
54
39
81
52
108
58.5
121.5
65
135
13
27
26
54
39
81
GI = 400ns
20-MHz Rate (Mbps)
40-MHz Rate (Mbps)
7.2
15
14.4
30
21.7
45
28.9
60
43.3
90
57.8
120
65
135
72.2
150
14.4
30
28.9
60
43.3
90
Data Sheet
Page 2 of 6
Advertisement
