Product Specifications - Cisco AIR-AP1131G-A-K9 Datasheet

Feature
Currently Supports 15 Nonoverlapping
Channels; Will Support 26 Channels
with a Future Firmware Release
Industry-Leading Radio Design
Variable Transmit Power Settings
Integrated Antennas
Hardware-Assisted AES Encryption
IEEE 802.11i-Compliant; WPA2-
Certified and WPA-Certified
Low-Profile Design
Multipurpose and Lockable Mounting
Bracket
Inline Power Support (IEEE 802.3af
and Cisco Inline Power)
Cisco IOS Software
SUMMARY/CONCLUSION
The Cisco Aironet 1130AG Series provides the ideal enterprise access point for offices and similar environments. With two high-performance radios,
these access points provide simultaneous support for the 802.11a and 802.11g standards, offering 108 Mbps of capacity for your growing WLAN.
Incorporating AES encryption in hardware, the Cisco Aironet 1130AG Series complies with the 802.11i security standard and is WPA2-certified,
helping to assure that your network employs the strongest security available while maintaining interoperability with products from other
manufacturers. Cisco IOS Software provides intelligent network services for scalable, robust, enterprise connectivity, while the Cisco SWAN
framework integrates wired and wireless networks for end-to-end security, manageability, and mobility. Additional design features, including
diversity antennas with omnidirectional coverage and an unobtrusive form factor, along with an attractive price, provide low total cost of ownership.
For office environments, the Cisco Aironet 1130AG Series is a cost-compelling solution for a high-capacity, high-security, enterprise-class WLAN.

PRODUCT SPECIFICATIONS

Table 2 lists the product specifications for Cisco Aironet 1130AG access points.
Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com.
Benefit
Lower potential interference with neighboring access points simplifies deployment
Fewer transmission errors deliver greater throughput
Provides robust signals to long distances
Mitigates the effects of multipath signal propagation for more consistent coverage
Allows access point coverage to be tuned for differing requirements
Low -1dBm setting supports closer spacing of access points in high-density deployments
Complete system is deployable out of the box without external antennas
Specifically designed to provide omnidirectional coverage for offices and similar radio frequency
environments
Provides high security without performance degradation
Helps to ensure interoperable security with wireless LAN client devices from other manufacturers
Unobtrusive design blends in to environment
"Quiet" LED does not draw attention to it when operating normally and no action is required
Installs easily to walls, ceilings, and suspended ceiling railways
Accommodates standard padlock to prevent theft
Provides an interoperable alternative to AC power
Simplifies deployment by allowing power to be supplied over the Ethernet cable
Compatible with 802.3af-compliant power sources
Delivers enterprise-class features for connectivity, scalability, and high availability
© 2005 Cisco Systems, Inc. All rights reserved.
Page 6 of 12