D-Link DPR-1260 - RangeBooster G Multifunction Print Server User Manual page 27

Section  - Configuration
Transmission
Select the transfer rate based on the speed of your
Rate: wireless network. It is strongly recommended to
keep this setting to Auto.
Super G Mode:
Super G is a group of performance enhancement
features that increase end user application
throughput in an 802.11g network. Super G
is backwards compatible to standard 802.11g
devices. For top performance, all wireless
devices on the network should be Super G
capable. Select either Disabled, Super G
without Turbo, Super G with Dynamic Turbo.
• Disabled - Standard 802.11g support,
no enhanced capabilities.
• Super G without Turbo - Capable
of Packet Bursting, FastFrames,
Compression, but no Turbo mode.
• Super G with Dynamic Turbo - Capable
of Packet Bursting, FastFrames,
Compression, and Dynamic Turbo. This setting is backwards compatible with non-Turbo (legacy) devices.
Dynamic Turbo mode is only enabled when all devices on the wireless network are Super G with Dynamic
Turbo enabled.
Wireless Channel:
Indicates the channel setting for the DPR-1260. By default the channel is set to 6. The Channel can be changed to fit the
channel setting for an existing wireless network or to customize the wireless network. The Auto Channel Scan setting can
be selected to allow the DPR-1260 to choose the channel with the least amount of interference.
802.11g Only
Enable this mode if your network is made up of purely 802.11g devices. If you have both 802.11b and 802.11g wireless
Mode:
clients, uncheck the box.
Security Mode:
See Chapter 4 for security settings.
D-Link DPR-160 User Manual
Ad-Hoc Settings