Audio Settings; Network Settings - NETGEAR NTV350 - HD Media Player User Manual

NeoTV 350 HD Media Player (NTV350)

Audio Settings

Press Menu and select Setup > Audio to go to audio settings.
The following settings are displayed
• Night Mode. This can be set to Off, On, or Comfort.
- On. Turning on night mode automatically lowers the intensity of bass sounds.
- Comfort. This setting smooths out high and low volume levels for all media and TV
channels. This prevents sudden changes in volume when you change media or a
channel.
• HDMI Output. By default, the digital output setting is LPCM. You can change it to LPCM
Multi-Ch or RAW. With the RAW setting, you need to connect a receiver to decode the
audio.
• SPDIF Output. The LPCM setting converts multi-channel audio into stereo. The RAW
setting plays digital audio without decoding.

Network Settings

Press Menu and select Setup > Network to go to the network settings. The only option on
this menu is Wired LAN Setup. By default this is set to DHCP IP (Auto). If you are using a
static IP address, you can change the setting here by selecting FIX IP (MANUAL).
Chapter 8. Setup | 33