NETGEAR NTV250 Installation Manual

©2010 NETGEAR, Inc. All rights reserved.
Technical Support
Thank you for selecting NETGEAR products.
Locate the serial number on the label of your product and use it to register
your product at http://www.NETGEAR.com/register. Registration is required
NETGEAR Roku Player (NTV250) before you can use the telephone support service. Registration at the
NETGEAR website is strongly recommended.
Installation Guide Go to http://support.netgear.com
For complete DoC please visit the NETGEAR EU Declarations of
Conformity website at:
11621/
Trademarks
NETGEAR, the NETGEAR logo, ProSafe, Smart Wizard, and Auto Uplink
are trademarks or registered trademarks of NETGEAR, Inc. Microsoft,
Windows, Windows NT, and Vista are registered trademarks of Microsoft
Corporation. Other brand and product names are registered trademarks or
trademarks of their respective holders.
Statement of Conditions
In the interest of improving internal design, operational function, and/or
reliability, NETGEAR reserves the right to make changes to the products
described in this document without notice. NETGEAR does not assume
any liability that may occur due to the use or application of the product(s) or
circuit layout(s) described herein.
Package Contents
for product updates and Web support.
NETGEAR Roku Player
http://kb.netgear.com/app/answers/detail/a_id/
Remote control
Power adapter
3
Your Player at a Glance
2 AAA batteries
A/V cable
4
1: Connect to the TV
AV
Connect the yellow connectors on the A/V cable (included) to
Choose the setup that matches the ports on your TV. For best
the VIDEO port on your player and the VIDEO IN port on your
picture quality, use an HDMI connection (if available). Make
TV. Connect the red and white connectors to the R-AUDIO-L
sure your TV is on and set to display the correct video input.
ports on your player and the L/R AUDIO IN ports on your TV.
HDMI (preferred)
Connect an HDMI cable (sold separately) to the HDMI port on
your player and to the HDMI IN port on your TV.
5 6