JVC TM-950DU - Professional Monitor W/sdi Instructions Manual page 5

11 POWER switch
Press this switch to turn the power on or set it to stand-by
mode.
ON ( ) : Power is turned on and the power
indicator lights.
STAND BY ( ) :Power is set to stand-by mode.
12 UNDER SCAN switch
Selects the scanning mode (over scan screen or under
scan screen).
(—) : Over scan screen
(_) : Under scan screen
13 PULSE CROSS switch
Checks the retrace period (sync signal) by delaying the
input signal.
(—) : Normal screen
(_) : Retrace period display screen
Note:
* When an SDI input signal is selected, the normal screen
is maintained regardless of the position of the PULSE
CROSS switch.
14 COLOR OFF switch
Selects the screen mode (color or B/W). Useful when you
want to check the white balance.
(—) : Color screen
(_) : B/W screen
15 BLUE CHECK switch
Selects the screen mode (normal or monochrome blue
screen). Useful when you want to check the chroma and
phase adjustment.
(—) : Normal screen
(_) : Monochrome blue screen
Note:
* The PHASE adjustment is effective only in the NTSC/525
mode.
[How to adjust]
1. Select the monochrome blue screen mode and input
color bar signals in the order of brightness.
2. Adjust the CHROMA and PHASE controls until the
density and brightness of each blue bar are the same.
Adjust the blue bars to the same
density and brightness.
5