JVC TM-950DU - Professional Monitor W/sdi Instructions Manual page 9

SDI Connection Example
Component serial
digital signal
(Signal cable)
Device
outputting
component
serial digital
signal (SMPTE
259M-compliant)
Audio
(Audio signal cable)
Notes:
● The audio signal embedded in the component serial
digital signal cannot be used with this unit. Use the
analogue output signal instead.
● Even when the power is set to stand-by mode, the signal
from the IN terminal is output to the Active Through output
terminal. (Power is always supplied to the SDI circuit.)
When the power cord is disconnected from the AC outlet,
the SDI circuit operation is interrupted and thus the signal
is not output from the Active Through terminal.
SDI
INPUT B
IN
Component serial
digital signal
(Signal cable)
Active Through Output
VIDEO
INPUT A
IN OUT
IN OUT
VIDEO
INPUT B
VIDEO/SDI switch:
VIDEO
select SDI
SDI
EXT SYNC
IN OUT
AUDIO
A
B
Audio
(Audio signal cable)
IN OUT
NORMAL
TALLY/REMOTE
AFC
FAST (Tally/Remote cable)
TALLY/
REMOTE
Device
receiving
component
serial digital
signal (SMPTE
259M-compliant)
External Controller
(Ext. Control Switch)
: Signal Flow
9