Trip Planning On Your Pocket Pc; Saving And Loading Trip Itineraries - ALK PC5 User Manual

Trip Planning on Your Pocket PC

You can use CoPilot on your Pocket PC for trip planning whether or not the
GPS receiver is connected and receiving data. Planning Mode allows you to run
a trip on your Pocket PC even when you're not in your car. You'll get driving
directions and maps that you can use for reference before your trip begins.
1. First turn on your Pocket PC
and launch CoPilot (tap Start >
Programs > CoPilot). In the
Welcome screen, tap the Mode
menu and select Planning.
3. Note that you should enter stops in
reverse order (destination first, origin
last) — the first stop (0) on the Plan
Trip itinerary is the starting point of
your trip. Tap Get Directions when
you have entered all your stops.
2. The Plan Trip screen will open.
Tap Add Stop, then add stops
to your trip as you would in
Guidance Mode. To pick a
stop from the map, see p. 46.
4. Now you'll see your route on the
map. You can tap the zoom
buttons on the toolbar to zoom
your view in and out.
5. To see driving directions, tap
the View button, then tap the
Itinerary button in the nested
toolbar that pops up.

Saving and Loading Trip Itineraries

To save a trip itinerary you put together in Planning or Guidance Mode, select
Save Trip As from the pop-up Tools menu. Give the trip a name and tap Ok.
At a later time you can open the trip in Guidance Mode using the Saved Trip
option in the Select Stop screen..
- 63 -
6. Your trip, along with the trip
itinerary, can be saved and
then opened later in Guidance
Mode (see below).
- 64 -