Panasonic DMRBW880 Operating Instructions Manual page 67

When "DLNA Function" is deactivated, make the
following settings.
1 While stopped
Press [FUNCTION MENU].
2 Select "Setup" in "Others", then press [OK].
3 Select "Network", then press [OK].
4 Select "Network Settings", then press [OK].
5 Select "Home Network ( DLNA ) Settings", then press
[OK].
Home Network (DLNA) Settings
Home Network (DLNA) function
Setting device name
Registration type for remote devices
Named devices
Unnamed devices
OK
RETURN
6 Select "Home Network ( DLNA ) function", then press
[OK].
7 Select "On", then press [OK].
≥"Power Save in Standby" in the Setup is set to "Off".
( 82)
8 Select "Registration type for remote devices", then press
[OK].
9 Select "Automatic" or "Manual", then press [OK].
Automatic All connected devices on the same
network can access this unit.
4 Panasonic DLNA compatible
equipment and 12 Non-Panasonic
DLNA compatible equipment will be
automatically registered.
≥Equipment registered earliest will be
deregistered when the 5th
Panasonic DLNA compatible
equipment or the13th Non-
Panasonic DLNA compatible
equipment is connected to this unit.
≥Ensure that the router for your home
network has adequate security
system to prevent unauthorized
access.
Manual Select the devices to register (
To register equipment manually)
To register equipment manually
After selecting "Manual" in step 9 (
1 Select "Named devices" or "Unnamed devices", then
On
Automatic
2 Named devices
3 Select "Yes", then press [OK].
4 Access this unit from the connected DLNA compatible
To deregister equipment
After selecting "Manual" in step 9 (
1 Select "Named devices" or "Unnamed devices", then
2 Select the equipment, then press [OK].
3 Select "Yes"
To set the name of this unit for displaying on connected
equipment
After performing step 7 (
1 Select "Setting device name", then press [OK].
2 Select "Select from a preset list" or "Create name", then
3 Select from a preset list
right,
press [OK].
Named 4 Panasonic DLNA compatible
devices equipment can be registered.
≥Even if it is Panasonic equipment,
you may not be able to register from
"Named devices". In this case select
"Unnamed devices".
≥Up to 4 devices can be registered.
Unnamed 12 Non-Panasonic DLNA compatible
devices equipment can be registered.
Select "Add new device" then press [OK].
Unnamed devices
Select the MAC Address for the connected equipment,
then press [OK].
equipment within 10 minutes.
press [OK].
.
left)
press [OK].
Select the preset name, then press [OK].
Create name
Enter the name. ( 69, Entering text)
left)
left)
67
VQT2J70