Kelvinator KF835 Instruction Manual

WASHING
MACHINE
KF 835

TECHNICAL INFORMATION

DIMENSIONS
POWER SUPPLY VOLTAGE / FREQUENCY
TOTAL POWER ABSORBED
HEATER RATING
WATER PRESSURE
MAXIMUM LOAD
SPINNING SPEED
This appliance complies with the following EC Directive:
- 72/23/EEC of 19.02.1973 - Low Voltage Directive
- 89/336/EEC of 03.05.1989 (including Amentment Directive 92/31/EEC) - EMV Directive.

SAFETY INSTRUCTIONS

You must read the whole of this instruction book before you use
the appliance. Follow the advice carefully. Keep the book for
future reference. If you sell or give away the appliance, make
sure that the book is passed to the new owner.
The following warnings are provided in the interest of overall
safety. You must read them before the appliance is installed or
used.
Use
This appliance is designed to be used by adults. Children
should not be allowed to touch the controls or play with the
product.
It is dangerous to modify the specifications of this appliance
in any way.
Always unplug the appliance and turn off the water after
use.
Only wash fabrics with are designed to be machine washed.
If in doubt, follow the instructions you find on the label of the
item itself.
Place small metal rings or edged plastic rings in a net or
bag.
Make sure that all pockets are empty. Hard, sharp objects
such as coins, safety pins, nails, screws or stones can
cause extensive damage.
Do not machine wash fabrics which are saturated with
petroleum products. If volatile cleaning fluids have been
INSTRUCTIONS MANUAL
Height with panel
Height without panel
width
depth
minimum
maximum
cotton
synthetics
wool
9
895 mm
850 mm
397 mm
600 mm
230 V / 50 Hz
2300 W (10 A)
1950 W
0,05 MPa (0,5 bar)
0,8 MPa (8 bar)
4,5 kg
2 kg
1 kg
800/400 rpm
used, make sure that they are thoroughly removed from the
fabrics before they are placed in the appliance.
Small and delicate objects (e.g. baby socks,stockings)
can be easily washed inside a small pillowcase with a zip
fastener or in larger socks.
Use only the recommended quantities of fabric conditioner.
Before cleaning, care and maintenance, ensure that the
machine is switched off.
Installation
Any electrical work required to install this appliance should
be carried out by a qualified electrician or competent
person.
Any plumbing work required to install this appliance should
be cariied out by a qualified plumber or competent person.
Make sure that the appliance does not stand on its
electrical supply cable.
This appliance is heavy. Care should be taken when
moving it.
All packaging and transit bolts must be removed before the
appliance is used. Serious damage may occur if this is not
done.
If your washing machine is in a room subject to temperatures
below freezing, the water must be removed from the
machine should the danger of freezing be expected.