Electrical Connection - Kelvinator KF320 Instructions Manual

Table of Contents

Advertisement

IMPORTANT: The distance from the floor to the
highest part of the hose should be between 60 to
90 cm. (It is advisable to be between 60 and 70
cm). The hose must not be bent nor twisted to
avoid clogging. Should an extension of the
discharging hose be unavoidable this must never
surpass 1.5 m and must be of the same diameter
as the original hose.
Make sure the hoses are not too tense.
Electrical connections
The applicable rules for electrical
security require an adequate earth-
ing. The plug of the appliance is pro-
vided with such a device.
Make sure your socket outlet is provided with
an adequate earthing too.
The manufacturer denys any liability in case
of accidents or incidents should these safety
measures not be observed.
Before plugging in the appliance make sure that:
1º the mains of your installation are the same as
on the rating plate of your appliance (the plate is
stuck to the rear of the appliance).
P0023
2º The meter, the fuses, the wiring and the
socket outlet can support the max. power
absorbed stated on the rating plate.
3º The socket base and the plug must fit in
adequately without any reducing interposition,
multiple outlets or adapters. If necessary replace
the socket outlet by an adequate one.
(Never touch the washing machine or any
electric appliance while standing on a wet floor
or being barefoot.)
1,5 m. Max.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents