Connecting to a Computer
PC Connection Diagram
Terminal on the
Camcorder
1
Output connection (signal flow
Transferring Photos - Direct Transfer
With the supplied USB cable and
software (on the DIGITAL VIDEO
Solution Disk CD-ROM) you can
transfer still images to a computer
simply by pressing
Preparations
The first time you connect the
camcorder to the computer, you need
to install the software and set the auto-
launch setting. From the second time
on, just connect the camcorder to the
computer using the USB cable to
transfer images.
USB Terminal
Open the LCD panel to access.
Connecting Cable
) to a computer or PictBridge-compatible printer with an USB port.
.
Connected Device
USB Cable
(supplied)
1
Install the supplied Digital Video
Software.
See Installing the Software in the
Digital Video Software instruction
manual (electronic version on PDF
file).
2
Set the camcorder to
mode.
3
Connect the camcorder to the
computer using the USB cable.
Refer to PC Connection Diagram
(
85).
Terminal on the
85