Table of Contents
Advertisement
Video
10x Optical Zoom
Press the W side of the zoom lever to
zoom out (wide angle). Press the T
side to zoom in (telephoto).
You can also change the zoom speed
(
42). You can select one of three
fixed zoom speeds or a variable speed
that depends on how you operate the
zoom lever: Press gently for a slow
zoom; press harder for faster zooms.
NOTES
• Keep at least 1 m away from the
subject. At full wide angle, you can
focus on a subject as close as 1 cm.
• You can also use the T and W buttons
on the wireless controller or the LCD
panel. The zoom speed will be the same
as with the camcorder or fixed at
[
SPEED 3] (when [
selected).
• When set to [
VARIABLE], the zoom
speed will be faster in record pause
mode.
32
Quick Start Function
When you press
camcorder enters the
mode. In standby mode the camcorder
consumes only about half the power
used when recording, saving energy
when you are using a battery pack.
Additionally, when you press
ready to start recording within approx.
1 second, ensuring you do not miss
important shooting opportunities.
VARIABLE] is
1
2
During standby mode (while the standby
lamp is on), do not disconnect the power
source.
QUICK START
QUICK START
again the camcorder is
QUICK START
Press
The standby lamp flashes at first
while the camcorder is preparing and
then stays on when it enters the
standby mode.
When you wish to resume
recording, press
again.
Within approx. 1 second, the
camcorder is ready in record pause
mode.
IMPORTANT
the
standby
(
21)
firmly.
QUICK START
Advertisement
Table of Contents
