Kenmore 37100 - Twilight Upright Vacuum Owner's Manual page 7

Please pay special attention to these hazard alert boxes, and follow any
instructions given° WARNING statements alert you to such dangers as
fire, electric shock, burns and personal injury. CAUTION statements alert
you to such dangerous personal injury and/or property damage.
WARNING
Electrical Shock Hazard
Do not plug into the electrical
supply until the assembly is
complete. Failure to do so could
result in electrical shock or
injury.
Before assembling the vacuum cleaner,
check the PACKING LIST on the cover
of the separate REPAIR PARTS LIST or
on the carton. Use this list to verify that
you have received all the components of
your new Kenmore vacuum cleaner.
HANDLE ASSEMBLY
1. Attach upper
handle to main
body of cleaner.
2. Push handle
plug onto the
front of cleaner.
Insert the one
(1) screw into
the back of the
handle and
tighten, making
sure the handle
plug is secure.
CAUTION
Do not overtighten.
Overtightening could strip the
screw holes.
Do not operate the vacuum
cleaner without the screws in
place.
EXTENSION WAND/
CREVICE TOOL
PLACEMENT
Place the telescoping wand (A) into the
wand holder on the left side of the vacuum
cleaner,. Place the crevice tool (B) in the
crevice tool holder on the right side of the
vacuum cleaner..
A
B
7