Direct Frequency Tuning - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

ENGLISH
Symbols used to indicate buttons in this manual
Button located on both the main unit and the remote control
unit
Button only on the main unit
Button only on the remote control unit
<SEARCH> <SHIFT>
Tuner select
indicators
[0 ~ 9]
[SRCH]
[o]


Direct Frequency Tuning

You can enter the receiving frequency directly to tune in.
BUTTON
<BUTTON>
n Operation on the main unit
[BUTTON]
1
<TUNER SELECT>
Press
"TUNER2" or tuner unit with installed ACD-AMFM
(sold separately).
<TUNER SELECT>
2
<SEARCH>
Press
3
<SELECT/ENTER>
Turn
then press
<SHIFT>
b Press
made.
4
When setting is completed, press
The preset frequency is tuned in.
<SELECT/ENTER>
n Operation on the remote control unit
1
[TUNER SELECT]
Press
"TUNER2" or tuner unit with installed ACD-AMFM
[TUNER SELECT]
(sold separately).
2
[SRCH]
Press
3
Input frequencies by means of
[o] is pressed, the immediately preceding input is
b If
cancelled.
4
When setting is completed, press
The preset frequency is tuned in.
[ENTER]
to select "TUNER1",
.
to select the frequency, and
<SHIFT>
to set the frequency.
for at least 2 seconds to cancel the entry you just
<SELECT/ENTER>
to select "TUNER1",
.
[0 ~ 9]
.
[ENTER]
.
.