Connecting The Antenna Terminals; Hd Radio - Denon TU-604CI - Multi-Zone Dual AM/FM Tuner Owner's Manual

Connecting the Antenna Terminals

The following explains how to connect the included antenna only.
When supplying multiple input from a single outdoor antenna, be sure to use a splitter that is compatible
with the specifications of the tuner and its installation environment.
Refer to the owner's manual for each item of equipment regarding connection of an outdoor antenna and
splitter.
FM/AM
FM indoor
antenna
(supplied)
NOTE
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
disconnect the AM loop antenna.
• Make sure the AM loop antenna lead terminals do
not touch metal parts of the panel.
• Locate each AM loop antenna at a distance that does
not cause interference (1.7 ft / 50 cm or more). (FM/
AM, HD Radio)
1.7 ft / 50 cm or more
AM loop antenna
(small, supplied)
Twist pair cable (Black)
n AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount

HD Radio

(Option board : ACD-HD (sold separately), for North America model only)
HD Radio is a service that is only available within the United States.
AM loop antenna (large, for HD Radio broadcasting, supplied)
FM indoor antenna
(dipole, for HD Radio
broadcasting, supplied)
Connect to the AM
antenna terminals.
Bend in the reverse direction.
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
Shield cable (Gray)
Black
White
Connection of AM loop antennas
1. Push the 2. Insert the 3. Return the
lever. conductor. lever.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding
and, in particular, specifies that the cable ground
shall be connected to the grounding system of
the building, as close to the point of cable entry
as practical.
ENGLISH