Dell PowerEdge 2400 Activation Manual page 7
Activating the dell perc2 poweredge expandable raid controller
Hide thumbs
Also See for PowerEdge 2400:
- Installation manual (8 pages) ,
- Update manual (2 pages) ,
- Rack installation instructions (32 pages)
Advertisement
12. Press the left- or right-arrow key to set the Onboard RAID option to RAID.
The default setting for Onboard RAID is SCSI.
13. Press <Alt> <b> to save the settings and reboot the system.
14. Configure the RAID subsystem and install the RAID driver and management
software.
For more information, refer to the integrated PERC 2/Si controller documentation.
Dell PowerEdge 2400 Systems—Activating the Dell PowerEdge Expandable RAID Controller 2/Si
1-5
Advertisement
