Dell PowerEdge 1955 Configuration Manual page 10

Figure 1-3. KVM Module Basic Configuration
6
1 monitor
4 DRAC/MC module
4 If required, configure the hard drives for RAID 1 or integrated mirroring. Configure RAID 1
prior to installation of the operating system. See "Configuring Drive Mirroring" on page 9
for more information.
NOTE:
are already configured.
5 If required, set up console redirection on the server module to either the BMC or
to the DRAC/MC module serial port in the server module System Setup program.
See "Serial or Telnet Console Interface" on page 14.
8
General System Configuration
5
4
2
5
If you ordered your server module configured for RAID 1, the drives in your server module
1
3
custom KVM cable
mouse
2
3 KVM module
6 keyboard