Table of Contents
Advertisement
v View, set, and change settings for power-management features
v View and clear the error log
v Enable USB keyboard and mouse support
Starting the Configuration/Setup Utility program
Complete the following steps to start the Configuration/Setup Utility program:
1. Turn on the server.
2. When the prompt Press F1 for Configuration/Setup appears, press F1. If you
3. Follow the instructions on the window.
4. Select settings to view or change.
Configuration/Setup Utility menu choices
The following choices are on the Configuration/Setup Utility main menu. Depending
on the version of the BIOS code in your server, some menu choices might differ
slightly from these descriptions.
v System Summary
v System Information
v Devices and I/O Ports
v Start Options
14
xSeries 306 Type 8836: User's Guide
have set both a user (power-on) password and a supervisor (administrator)
password, you must type the supervisor password to access the full
Configuration/Setup Utility menu. If you do not type the supervisor password, a
limited Configuration/Setup Utility menu is available.
Select this choice to view configuration information, including the type, speed,
and cache sizes of the microprocessors and the amount of installed memory.
When you make configuration changes through other options in the
Configuration/Setup Utility program, the changes are reflected in the system
summary; you cannot change settings directly in the system summary.
This choice is on the full and limited Configuration/Setup Utility menu.
Select this choice to view information about your server. When you make
changes through other options in the Configuration/Setup Utility program, some
of those changes are reflected in the system information; you cannot change
settings directly in the system information.
This choice is on the full Configuration/Setup Utility menu only.
– Product Data
Select this choice to view the machine type and model of your server, the
serial number, and the revision level or issue date of the BIOS code stored in
electrically erasable programmable ROM (EEPROM).
Select this choice to view or change assignments for devices and input/output
(I/O) ports.
Select this choice to enable or disable integrated SCSI and Ethernet controllers
and all standard ports (such as serial and parallel). If you disable a device, it
cannot be configured, and the operating system will not be able to detect it (this
is equivalent to disconnecting the device). If you disable the integrated Ethernet
controller and no Ethernet adapter is installed, the server will have no Ethernet
capability. If you disable the integrated USB controller, the server will have no
USB capability; to maintain USB capability, make sure that Enabled is selected
for the USB Host Controller and USB BIOS Legacy Support options.
This choice is on the full Configuration/Setup Utility menu only.
Advertisement
Table of Contents
