Dell PowerEdge 1900 Installation Manual page 10

Figure 1-5. SATA Cable Routing in a PowerEdge 2900 or 1900
3
2
1
1 optical drive
3 SATA data cable
5 SATA power connector on SAS
backplane (PowerEdge 2900 only)
8 Reconnect the cables to the SAS controller daughter card.
9 Close the system. See "Closing the System" in your Hardware Owner's
Manual.
10 Reconnect the system to power and turn on the system and attached
peripherals.
10
Installing a SATA Optical Drive
2 SATA power cable
4 SATA connector on system board
4
5