Table of Contents
Advertisement
Optimized for virtualization and database applications with maximum
memory and compute capacity in a blade
Please see the Legal Information section for important notices and information.
reliable
• Xeon 7500 Series memory controllers support IBM Chipkill memory protection technology with x4
DIMMs (x4 data width of rank) and x8 DIMMs
For increased availability beyond Chipkill error correction, the eX5 servers offer additional levels
of IBM Active Memory protection:
Memory ProteXion technology provides multichip error protection and works in conjunction with
Chipkill technology—which provides multibit protection per chip—and standard ECC protection,
to provide multi-level memory correction.
With memory rank sparing, two unused ranks per memory card are configured as spares.
These spare ranks are used in the event of a memory failure on the same memory card.
Memory mirroring works much like disk mirroring. The total memory is divided into two
channels. Data is written concurrently to both channels. If a DIMM fails in one of the DIMMs in
the primary channel, it is instantly disabled and the mirrored (backup) memory in the other
channel becomes active (primary) until the failing DIMM is replaced. With mirroring enabled,
one-half of total memory is available for use. (Note: Due to the double writes to memory,
performance is affected.) Mirroring is handled at the hardware level; no operating system
support is required.
Memory scrubbing is an automatic daily test of all system memory. It detects and reports
memory errors that might be developing before they cause a server outage. Memory scrubbing
and Memory ProteXion work together. When a bit error is detected, memory scrubbing
determines whether the error is recoverable. If the error is recoverable Memory ProteXion
technology will write the data to new location; if it is not recoverable, scrubbing sends an alert to
light path diagnostics, which then notifies IBM Systems Director.
Memory is available in 2GB, 4GB, 8GB, or 16GB DIMMs.
High-Performance Scalability
Because of eX5 design, an HX5 server has the incredible flexibility of scaling from 2 sockets to 4
sockets with ease, doubling the memory and storage capacity and I/O slots in the process. A 2-
node configuration is achieved simply by connecting 2 30mm blades together via the Quick Path
Interconnect (QPI) ports, for 4 sockets and 32 DIMMs (256GB).
Alternatively, you can scale via MAX5, adding memory capacity to increase performance in an
I/O-intensive enironment. This configuration connects 1 HX5 blade to 1 MAX5 blade, for a total
of up to 40 DIMMs (320GB). Note: Selected models of HX5 come standard with a MAX5 blade.
This scalability and memory expansion feature is a unique IBM enhancement, not offered by
other x86 server architectures.
Integrated Virtualization
HX5 offers a separately orderable IBM 2GB USB Flash Drive option preloaded with VMware
vSphere Hypervisor (previously ESXi), an embedded version of VMware ESX Server. Microsoft
Hyper-V and Xen are also supported, installed by the user on an SSD.
ESXi is fully contained on the flash drive, without requiring any disk space. Because it runs from
flash memory, it's extremely fast and ideal for diskless configurations. It also offers enhanced
security, because it runs without an operating system-based console and is updated/patched
much like firmware. ESXi includes all the performance, scalability and compatibility features of
ESX Server, including full VMFS support across FC SAN, iSCSI SAN, and NAS, and 4-way
VSMP. Rather than management through a Service Console based on a Linux operating
system, ESXi relies on aggregate management tools, including VirtualCenter, the Remote
Command Line interface and the introduction of CIM for standards-based and agentless
hardware monitoring. Licensing works the same as for "standard" ESX Server.
Disk Controllers
HX5 models support an optional LSI 1064E SAS/SATA controller (required for SSD support).
This controller supports up to two internal solid-state drives and offers hardware RAID-0/1/1E
support.
High Performance/High-Availability Internal Storage
The HX5 supports up to two fixed 1.8-inch solid-state drives (SSDs) internally:
• SATA-based solid-state — 50GB capacity (100GB maximum)
High I/O Performance
– Offers up to 8X more IOPS than HDDs (67/33% read/write OLTP transaction base mix);
– Optimized for heavy mix of read and write operations, such as transaction processing, media
8.
Advertisement
Table of Contents
