Windows - Canon CanoScan N1240U User Manual

chapter 1
Before You Begin
Contents
Troubleshooting
Glossary
Index
Starting and Closing ScanGear CS-U
ScanGear CS-U is not a stand-alone program that can be started by itself. It
is used as a TWAIN driver (Windows) or plug-in (Macintosh). Start the
application program first, then start ScanGear CS-U from the program.
When starting ScanGear CS-U, confirm that the scanner is
correctly connected to the computer.
Note

Windows

Starting
1. Start the TWAIN-compliant application software such as PhotoStudio
or Photoshop.
< If you have installed another scanner or a digital camera, select this
scanner. >
a. Click the [File] menu and select [Select Source] or such.
b. Click to highlight [CanoScan N670U/N676U] or [CanoScan
N1240U] and click [Select].
2. Click the [File] menu and select [Acquire] or such.
ScanGear CS-U will start.
Closing
Click the (close box) in the ScanGear CS-U window.
9